Best Price on Lift Industrial Safety Gear - One-way Governor For Passenger Elevator With Machine Roomless THY-OX-208 – Tianhongyi

THY-OX-208 one-way Overspeed Governor complies with TSG T7007-2016, GB7588-2003+XG1-2015, EN 81-20:2014 and EN 81-50:2014 regulations, and meets the requirements of the rated speed ≤1.75m/s for guests without a guest Ladder, using centrifugal throwing block structure, remote solenoid control, with electrical control test action and electrical switch reset, mechanical mechanism can be reset automatically, overspeed check electrical safety device, reset check electrical safety device and trigger the drive host brake Function. The diameter of the steel wire rope is equipped with φ6 as standard, and it is used with the tensioning device THY-OX-300 or THY-OX-200, which is suitable for ordinary indoor working environment.

When installing the speed limiter, pay attention to the reasonable arrangement and connection of related accessories. Only reasonable arrangement and matching can effectively realize safety protection. The specific steps to adjust the requirements are as follows:

1. Adjust the installation foundation, determine the position of the speed limiter, and pre-tighten the fixing bolts;

2. Install supporting parts according to the layout requirements, such as speed limiter wire rope, tensioning device, wire rope connector, etc.;

3. Adjust the position of the speed limiter and the tension device to ensure that the supporting parts such as the speed limiter meet the acceptance requirements;

4. After completion, lock the position of the speed limiter, check and adjust the pawl and electrical switch of the speed limiter to be in normal state, and then run the elevator at a slow speed, check the running state of the speed limiter, and require no abnormal noise, smooth rotation and no shaking.

Before installing and putting into use, please pay attention to check to determine the following status:

1. The pitch circle diameter of the overspeed governor and the position of the tensioner sheave must be consistent up and down, and the direction of the overspeed governor is consistent with the up and down direction of the elevator car;

2. After the speed limiter wire rope is installed, the brake shoe should not be rubbed when it is rotating in normal state. The center of the brake shoe should be consistent with the center of the wire rope and be parallel.

3. When the speed limiter wire rope uses grease type wire rope, the speed limit tension will be smaller than the parameter value on the nameplate, so pay attention to it when using it;

4.When the guide rail is used for fixing, the fixed installation position is less than or equal to 200mm from the guide rail support or between two guide rail supports.

1. Fast Delivery

2. The transaction is just the beginning, the service never ends

3. Type: Overspeed Governor THY-OX-208

4. We can provide safety components such as Aodepu, Dongfang, Huning, etc.

5. Trust is happiness! I will never fail your trust!

How did your customers find your company?

We usually do this through online publicity, exhibitions, and introductions between friends. With high-efficiency product quality, satisfactory service, appropriate price, and good reputation, it has been unanimously recognized by customers.Solve problems for customers, understand customer needs in many aspects, do a good job of communication and service, uphold the concept of one cooperation, lifelong friends, and serve every customer!

Does your company have its own brand?

We have our own professional brand “THOY Elevator”, and we can also provide components of different brands according to your needs. If you have any needs, please feel free to consult me, thank you!

What are the advantages of your company in the industry?

•Brings together professional management and has strong R&D capabilities and technical strength;

•The technical level is higher than the industry average and has a good reputation;

•Large production volume and timely delivery;

•Quality assurance, service guarantee, after-sales guarantee;

•Integrate industry resources, achieve responsiveness and create maximum benefits;

•Supplier advantage, with top suppliers in the industry, outstanding product structure, covering a complete set of elevators, cars, and traction Machine, door machine, counterweight, steel wire rope and safety parts, etc.

•The company fully implements a refined management system, through the control of production costs and various expenses, to benefit customers and achieve a win-win situation.