Excellent quality Lift Guide Rail - Sliding Guide Shoes Are Used For Ordinary Passenger Elevators THY-GS-029 – Tianhongyi

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We know that we only thrive if we could guarantee our combined price tag competiveness and quality advantageous at the same time for Two Sided Door Elevator , Small Residential Elevator , Lift Cop , Living by quality, development by credit is our eternal pursuit, We firmly believe that after your visit we will become long-term partners.
Excellent quality Lift Guide Rail - Sliding Guide Shoes Are Used For Ordinary Passenger Elevators THY-GS-029 – Tianhongyi Detail:

Rated Speed ≤1.75m/s
Positive Force 1050N
Yawing Force 650N
Match The Guide Rail 9,10,15.88,16
Applicable to the lateral capsules  


1

THY-GS-029 Mitsubishi sliding guide shoes are installed under the safety gear seat on the upper beam of the car and the bottom of the car. Generally, there are 4 each, which is a part to ensure the car runs up and down along the guide rail. Mainly used for elevators whose rated speed is below 1.75m/s. This guide shoe is mainly composed of shoe lining, shoe seat, oil cup holder, compression spring and rubber parts. The shoe seat has sufficient strength and rigidity, and has good vibration damping. The shoe seat is usually made of gray cast iron; because the plate welding structure is simple to manufacture, the plate welding structure is also commonly used. The boot lining has different widths of 9-16mm, which is convenient for users to choose according to the width of the guide rail. It is made of highly wear-resistant polyurethane. In order to improve the sliding performance and reduce the friction between the shoe lining and the guide rail, lubricating oil is required, so there is a bracket for placing the oil cup on the guide shoe. The lubricating oil in the oil box is evenly coated on the working surface of the guide rail through the felt to achieve the purpose of automatic lubrication.

Before installing the guide shoe, first screw the adjusting nut so that the gap X between the bracket and the rubber pad is 1mm. After installing the guide shoe, loosen the adjusting nut so that the gap Y between the adjusting nut and the bracket surface is about 2~4mm. At this time, the gap X is also Should be between 1~2.5mm. Then tighten the fastening nut. After adjusting according to the previous steps, you can observe the tightness of the guide shoes by shaking the car appropriately, that is, keep the guide shoes and the guide rails in basic contact, but not too tight. At the same time, the installation state of the guide shoe can be fine-tuned according to the guide shoe-guide rail coordination state at this time.

2


Product detail pictures:

Excellent quality Lift Guide Rail - Sliding Guide Shoes Are Used For Ordinary Passenger Elevators THY-GS-029 – Tianhongyi detail pictures


Related Product Guide:

Quality first, Honesty as base, Sincere service and mutual profit is our idea, in order to develop continuously and pursue the excellence for Excellent quality Lift Guide Rail - Sliding Guide Shoes Are Used For Ordinary Passenger Elevators THY-GS-029 – Tianhongyi , The product will supply to all over the world, such as: luzern, Jordan, Johor, In order to meet the increasing requirement of customers both home and aboard, we will keep carrying forward the enterprise spirit of Quality, Creativity, Efficiency and Credit and strive to top the current trend and lead fashion. We warmly welcome you to visit our company and make cooperation.
Speaking of this cooperation with the Chinese manufacturer, I just want to saywell dodne, we are very satisfied.
5 Stars By Carey from Danish - 2018.09.16 11:31
Product variety is complete, good quality and inexpensive, the delivery is fast and transport is security, very good, we are happy to cooperate with a reputable company!
5 Stars By Lynn from India - 2017.06.16 18:23

Send your message to us:

Send your message to us:

Write your message here and send it to us