PriceList for Guide Rails In Elevator - Sliding Guide Shoes Are Used For Ordinary Passenger Elevators THY-GS-029 – Tianhongyi
PriceList for Guide Rails In Elevator - Sliding Guide Shoes Are Used For Ordinary Passenger Elevators THY-GS-029 – Tianhongyi Detail:
| Rated Speed | ≤1.75m/s |
| Positive Force | 1050N |
| Yawing Force | 650N |
| Match The Guide Rail | 9,10,15.88,16 |
| Applicable to the lateral capsules |
THY-GS-029 Mitsubishi sliding guide shoes are installed under the safety gear seat on the upper beam of the car and the bottom of the car. Generally, there are 4 each, which is a part to ensure the car runs up and down along the guide rail. Mainly used for elevators whose rated speed is below 1.75m/s. This guide shoe is mainly composed of shoe lining, shoe seat, oil cup holder, compression spring and rubber parts. The shoe seat has sufficient strength and rigidity, and has good vibration damping. The shoe seat is usually made of gray cast iron; because the plate welding structure is simple to manufacture, the plate welding structure is also commonly used. The boot lining has different widths of 9-16mm, which is convenient for users to choose according to the width of the guide rail. It is made of highly wear-resistant polyurethane. In order to improve the sliding performance and reduce the friction between the shoe lining and the guide rail, lubricating oil is required, so there is a bracket for placing the oil cup on the guide shoe. The lubricating oil in the oil box is evenly coated on the working surface of the guide rail through the felt to achieve the purpose of automatic lubrication.
Before installing the guide shoe, first screw the adjusting nut so that the gap X between the bracket and the rubber pad is 1mm. After installing the guide shoe, loosen the adjusting nut so that the gap Y between the adjusting nut and the bracket surface is about 2~4mm. At this time, the gap X is also Should be between 1~2.5mm. Then tighten the fastening nut. After adjusting according to the previous steps, you can observe the tightness of the guide shoes by shaking the car appropriately, that is, keep the guide shoes and the guide rails in basic contact, but not too tight. At the same time, the installation state of the guide shoe can be fine-tuned according to the guide shoe-guide rail coordination state at this time.

Product detail pictures:
Related Product Guide:
We thinks what buyers think, the urgency of urgency to act during the interests of a purchaser position of theory, allowing for much better high-quality, reduced processing costs, charges are more reasonable, won the new and outdated consumers the support and affirmation for PriceList for Guide Rails In Elevator - Sliding Guide Shoes Are Used For Ordinary Passenger Elevators THY-GS-029 – Tianhongyi , The product will supply to all over the world, such as: St. Petersburg, Sydney, Singapore, Aiming to grow to be by far the most professional supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal goods. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. Detailed data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're going to allow you to get complete acknowledge about our items and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!






